UBS-2 Handgrip Set on/off
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: K0.0001804
  This handgrip configuration can be used with any camera, fitting to 15 or 19 mm studio rods or 15 mm lightweight support rods
    
            11 445 SEK
          
        ORDER
  
  
  
  Articulating Camera Handgrip Right on/off
  
    
  
      
      
    
    
  
  
  
  
                Ident. No: K2.45886.0
  An articulation handgrip right with on/off trigger.
RS 3-pin Fischer connector
    
            5 925 SEK
          
      ORDER
    
  
  
  LBS-2 Handgrip Set on/off
  
    
  
      
      
    
    
  
  
  
  
              Ident. No: K0.0001803
  This handgrip configuration can be used with any camera, fitting to 15 mm lightweight support rods
    
            10 880 SEK
          
        ORDER
  
  
  
  Articulating Handgrip - Right
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: K4.54521.0
  The ARRI Articulated Handgrip - Right is an extremely durable and ergonomically formed articulating handgrip for right camera side that attaches to the rosette of any ARRI camera. Includes REC button and short built-in cable to RS connector (Fischer 3 pin).
    
            14 270 SEK
          
      ORDER
    
  
  
  Handgrip Extension Short
  
    
  
      
      
    
    
  
  
  
  
                Ident. No: K2.47648.0
  The ARRI Handgrip Extension Short is an extension that attaches between the camera body and the handgrip to move the handgrip further away from the camera body. (measurement from end to end: 10 mm)
    
            1 385 SEK
          
      ORDER
    
  
  
  ARRI Shoulder Set S-4
  
    
  
      
      
    
    
  
  
  
  
              Ident. No: K2.47093.0
  The ARRI Shoulder Set S-4 for short bridge plates BP8/9 includes left and right grips with run/stop switch via ARRI standard RS 3-pin connector.
    
            17 450 SEK
          
      ORDER
    
  
  
  Handgrip Extension Long
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: K2.47863.0
  The ARRI Handgrip Extension Long is made to extend handgrip parallel to camera body. (measurement from end to end: 19,5 mm)
    
            1 990 SEK
          
      ORDER
    
  
  
  Handgrip with on/off switch
  
    
  
      
      
    
    
  
  
  
  
                Ident. No: K2.47862.0
  The ARRI Handgrip with on/off switch with RS 3-Pin connector; cables with other connectors available
    
            3 385 SEK
          
      ORDER
    
  
  
  Handgrip without on/off switch
  
    
  
           
  
  
  
  
              Ident. No: K2.47861.0
  The ARRI Handgrip without on/off switch only for mechanical use - without RS cable 
    
            1 265 SEK
          
      ORDER
    
  
  
  Articulating Handgrip - Left
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: K4.54523.0
  The ARRI Articulated Handgrip - Left is an extremely durable and ergonomically formed articulating handgrip for left camera side that attaches to the rosette of any ARRI camera. 
    
            9 650 SEK
          
      ORDER
    
  
  
  ARRI Handgrip Set Right
  
    
  
      
      
    
    
  
  
  
  
                Ident. No: K0.0001249
  Extremely durable articulating right handgrip and extension for hand holding AMIRA & ALEXA. 
Attaches to ARRI rosettes at the camera or through UBS-2 and LBS-2 directly.
    
            8 880 SEK
          
      ORDER
    
  
  
  Articulating Handgrip Set
  
    
  
      
      
    
    
  
  
  
  
              Ident. No: K2.0001021
  Extremely durable and ergonomically formed articulating handgrip for right camera side that attaches to the rosette of any ARRI camera. 
Includes REC button and short built-in cable to RS connector (Fischer 3 pin) and for left camera side without connector.
    
            18 990 SEK
          
      ORDER
    
  
  
  ARRI Handgrip Set
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: K0.71033.0
  Extremely durable articulating right and left handgrips and extensions for hand holding all ALEXA cameras. 
Attaches to ARRI rosettes at the camera or through UBS-2 and LBS-2 directly.
RS 3-Pin Fischer Connector.
    
            21 045 SEK
          
      ORDER
    
  
  
  LBS-2 Handgrip Set
  
    
  
      
      
    
    
  
  
  
  
                Ident. No: K0.0000465
  This ARRI handgrip configuration can be used with any camera, fitting to 15 mm lightweight support rods.
    
            8 830 SEK
          
      ORDER
    
  
  
  UBS-2 Handrip Set
  
    
  
      
      
    
    
  
  
  
  
              Ident. No: K0.0000621
  This handgrip configuration can be used with any camera, fitting to 15 or 19mm studio rods or 15mm lightweight support rods.
    
            9 390 SEK
          
      ORDER
    
  
  
  Handgrip Normal - without on/off
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: RF.80219
  Support handle with ARRI Rosette and soft padding.
    
            1 265 SEK
          
        ORDER
  
  
  
  Handgrip Extension Medium 160mm
  
    
  
      
      
    
    
  
  
  
  
                  
              Ident. No: RF.80225
  Handgrip Extension with ARRI rosette.
Can be adjustet up and down with a locking wrench.
More extensions can be added to each other.
    
            1 845 SEK
          
        ORDER
  
  
  
  Extension Tube for Handgrip
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: K2.47136.0
  A short aluminum rod that attaches between camera body and handgrip to move the handgrip further away (left or right) from the camera body.
    
            1 230 SEK
          
        ORDER
  
  
  
  Lightweight Bridge Support LBS-2
  
    
  
      
      
    
    
  
  
  
  
                  
              Ident. No: K2.66275.0
  ARRI Lighweight Bridge Support LSB-2.
Compatibility with 15mm lightweight rod configuration.
    
            2 670 SEK
          
      ORDER
    
  
  
  Handle Extension Block HEB-3
  
    
  
      
      
    
    
  
  
  
  
                Ident. No: K2.0001017
  Can be used as an extension for ARRI Handles or as an extra mounting point on cage systems.
    
            1 640 SEK
          
        ORDER
  
  
  
  HGA-1 Handgrip adapter for Canon
  
    
  
      
      
    
    
  
  
  
  
              Ident. No: K2.66191.0
  Extension for original Canon handgrip.
    
            4 005 SEK
          
        ORDER
  
  
  
  Handgrip Adapter HGA-1 Set LBS-2
  
    
  
      
      
    
    
  
  
  
  
    Ident. No: K0.0000623
  Extension for original Canon handgrip.
With the Lightweight Bridge Support LBS-2 the set can be mounted on 15mm lightweight rods.
    
            6 570 SEK
          
      ORDER
    
  
  
  SCH-1 Side Camera Handle
  
    
  
      
      
    
    
  
  
  
  
                Ident. No: K2.72016.0
  The ARRI SCH-1 attaches to the top of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA Studio, ALEXA XT, ALEXA XT M, ALEXA XT Plus or ALEXA XT Studio camera and provides numerous 3/8"-16 UNC threaded mounting points for accessory mounting
    
            10 640 SEK
          
      ORDER
    
  
  
  ACG-2 Adjustable Center Grip Tall
  
    
  
      
      
    
    
  
  
  
  
      Ident. No: K2.72022.0
  The ARRI ACG-2 attaches to the Side Camera Handle (SCH-1) instead of the Adjustable Center Grip Medium (ACG-1). 
    
            3 145 SEK
          
      ORDER
    
  



