Ident. No: K2.47738.0
The MB-20 II Basic Module with Sunshade is the basic MB-20 System-II Mattebox carrier with fixed sunshade, without filter stage assembly or camera mounting hardware.
7 700 SEK
ORDER
Ident. No: K2.65089.0
The ARRI 3-Stage Filter Stage for MB-20 holds three filters up to 5.65x5.65 or 5x6, both filters individually rotatable.
7 085 SEK
ORDER
Ident. No: K2.65025.0
The ARRI MB-20/29 Console for Lightweight Support is for use with MB-20 in swingaway mode with lightweight support rods conforming to ARRI standard.
2 260 SEK
ORDER
Ident. No: K0.60029.0
The ARRI MB20/29 SYSTEM II Side Flags Pair Can be used simultaneously with both top- and bottom-mounted eyebrow flags. Compatible with 16x9 Wide Angle System. Not compatible with MB-20 System-I.
3 285 SEK
ORDER
Ident. No: K2.47740.0
The ARRI Eyebrow Flag can be used for top or bottom.
Foldable for compact storage. Both top- and bottom-mounted flags can be used simultaneously with side flags. Compatible with 16x9 Wide Angle System.
Not compatible with MB-20 System-I.
1 385 SEK
ORDER
Ident. No: K2.47691.0
The ARRI Hard Matte Set 35mm. Not compatible with 16x9 Wide Angle sunshade.
1 950 SEK
ORDER
Ident. No: K2.47690.0
ARRI Hard Matte Set 2/3', 16:9 Not compatible with 16x9 Wide Angle sunshade.
1 950 SEK
ORDER
Ident. No: K2.47689.0
The ARRI Hard Matte Set 2/3', 4:3 Not compatible with 16x9 Wide Angle sunshade.
1 950 SEK
ORDER
Ident. No: K2.65026.0
The ARRI 2-Stage Filter Assembly for the MB-20II holds two filters up to 5.65x5.65 or 5x6, both filters individually rotatable. Requires K2.65032.0 - MB-20 Swingaway Module for use with R2 Rings.
5 340 SEK
ORDER
Ident. No: K2.66127.0
The ARRI Lightweight Support Console for MMB-2
1 130 SEK
ORDER
Ident. No: K2.66134.0
A holder that is needed to mount the side flags on the MMB-2 matte box.
1 130 SEK
ORDER
Ident. No: K2.66124.0
The ARRI Mini Matte Box MMB-2 Basic Module with a 114mm back.
4 980 SEK
ORDER
Ident. No: K2.66169.0
The ARRI MMB-2 Basic Module double 4x5,65''
6 110 SEK
ORDER
Ident. No: K2.49050.0
The ARRI Case for the MB-18/MB-20/Mb-29 with variable dividers.
7 655 SEK
ORDER
Ident. No: K2.66243.0
The ARRI LMB-6 Set of Masks are available as the LMB-6 has its own sets of five mattes that can be clipped on the hood.
1 900 SEK
ORDER
Ident. No: K0.0001675
The ARRI SMB-1 Accessory Set is for the SMB-1, a studio matte box for filter sizes up to 6.6" x 6.6". It is designed for bigger wide-angle prime lenses as well as zooms.
8 980 SEK
ORDER
Ident. No: K2.0001172
The ARRI SMB-1 is a French flag support with sliding accessory mount designed to fit the top of the SMB-1 and particularly well suited for ultrasonic sensors such as the ARRI UDM-1
2 055 SEK
ORDER
Ident. No: K2.0001517
The ARRI SMB Top and Bottom Flag are a pair of flag holders used to fit the SMB top/bottom flag at the bottom of the studio matte box
1 640 SEK
ORDER
Ident. No: K2.34890.0
The ARRI Flexible Shaft is for driving geared filter stages (fits all matte boxes with geared stages)
1 540 SEK
ORDER
Ident. No: K0.0001679
The ARRI SMB-1 Light Shield set is for a studio matte box for filter sizes up to 6.6" x 6.6". It is designed for bigger wide-angle prime lenses as well as zooms.
14 165 SEK
ORDER
Ident. No: K2.66273.0
The ARRI SMB-1 Top/Bottom Flag is a the top and bottom flag with advanced adjusters and foldable side flaps
6 875 SEK
ORDER
Ident. No: K2.66274.0
The ARRI SMB-1 Side Flags (Pair) is a Pair of side flags with advanced adjusters for 4:3 ratio sunshade
7 905 SEK
ORDER
Ident. No: K2.0001462
The ARRI SMB-1 1-Fitler Stage incl. 1 Filter Frame is a stackable filter stage for one filter frame (rotatable) with "filter/tray catcher"
5 750 SEK
ORDER
Ident. No: K2.0001465
The ARRI SMB-1 2-Filter Stage incl. 2 Fitler Frames stackable filter stage for two filter frames (rotatable as pair) with geared frame drive and two integrated and independent "filter/tray catchers"
7 800 SEK
ORDER
Ident. No: K2.0001174
2-part bellow ring (R1) designed to follow the tilt movement of the SMB-1. Compatible with all R8 screw-on rings (and R4 screw-on rings via K2.66095.0)
2 875 SEK
ORDER
Ident. No: K2.0001161
The ARRI SMB-1 Mattes SPH/ANAM is a set of 5x mattes with openings ratio 2:1 and 1x plain protective cover to fit the SMB-1 Sunshade "spherical" version.
2 260 SEK
ORDER
Ident. No: K2.66267.0
The ARRI SMB-1 Mattes SPH is a set of 5x mattes with openings ratio 4:3 and 1x plain protective cover to fit the "spherical" sunshade.
2 260 SEK
ORDER
Ident. No: K2.0000676
The ARRI SMB-1 Mattes ANAM is a set of 5x mattes with opening ratios 2:1 and 1x plain protective cover to fit the SMB-1 Sunshade ANAM.
2 260 SEK
ORDER
Ident. No: K0.0001676
The ARRI SMB-1 Anamorphic Upgrade Set is for the SMB-1, a studio matte box for filter sizes up to 6.6" x 6.6". It is designed for bigger wide-angle prime lenses as well as zooms.
12 215 SEK
ORDER
Ident. No: K2.0001520
The ARRI SMB Tilt and Extension module is a stand alone tilt and extension module for upgrading SMB-1 Basic to SMB-1 Tilt (extension function included)
9 750 SEK
ORDER
Ident. No: K2.0001519
The ARRI SMB Extension module is a stand alone extension module for downgrading SMB-1 Tilt to SMB-1 Basic
3 490 SEK
ORDER
Ident. No: K2.66262.0
The ARRI SMB-1 Tilt module is for a Studio matte box 6.6" x 6.6" with 4:3 ratio sunshade, integrated tilt/extension module and back plate (R1 ring compatible)
20 015 SEK
ORDER
Ident. No: K2.0001466
The ARRI SMB-1 Sunshade ANAM is a matte box hood with a 2:1 format ratio, for use with the SMB-1 in combination with anamorphic side flags and anamorphic set of mattes.
1 640 SEK
ORDER
